Glass Fixing Clamp Frameless Shower Glass Clamp for Glass Partition Door 8-10mm

This clamp is specified for 8-10mm tempered glass, so it is the model to order when your panels are 8mm or 10mm - not 12mm. If your glass is 12mm, use our 8-12mm clamp instead, because the jaws are sized to the panel and a mismatch means a loose or over-stressed grip. Confirm your glass thickness before ordering.

It is a glass fixing clamp for frameless glass partition doors and panels - it holds a glass partition panel in position against a wall or another structure. Combined with glass-to-glass clamps and door hinges, it completes a frameless shower enclosure or bathroom partition. This listing is the wall-to-glass type.

The clamp is available in SUS304 and SUS316 stainless steel, brass, and zinc alloy. For a bathroom partition, SUS304 is the standard choice - solid stainless, good corrosion resistance and a fair price. SUS316 adds salt resistance for coastal sites; brass suits a warmer interior look; zinc keeps the cost down for light-duty use.

The wall plate screws into solid wall structure - studs, steel framing, or masonry anchors. Then the glass panel sits in the clamp jaws on rubber gaskets and the face plate bolts down evenly. Make sure the wall anchor point is solid before tiling over it; the clamp cannot give strength that is not in the wall behind it.

No. Every contact surface between the clamp and the glass is a rubber gasket, so there is no metal touching the glass. The face plate is torqued evenly to spread pressure across the panel. This avoids edge chipping and stress marks - critical with tempered glass, which cannot be cut or drilled after tempering.

Samples start at 1 piece - a sample fee may apply and is refundable on a production order. Standard orders start at 50 pieces; OEM orders with custom finishes or logos start at 500 pieces. Lead time is 15-25 days. Since this clamp is for 8-10mm glass, confirm your panel thickness so we do not ship the wrong size.