Heavy Duty Bottom Patch Fitting Stainless Steel for Commercial Glass Door System

The 700 uses a thicker body and a larger clamping surface, so it spreads the vertical load over more glass edge than the 698. That suits bigger commercial doors. It still fits 8-12 mm tempered glass, is built in 304 or 316 stainless, and is a common choice for mall and office entrance doors.

We rate it by application rather than a single number: it is built for heavier frameless commercial doors than the standard 698 and should be paired with a floor spring or pivot that carries the door weight. For an exact recommendation, send the door width, height, and glass thickness - we will confirm the layout instead of guessing.

8-12 mm tempered glass, same as the rest of our patch fitting range. The heavier body does not change the glass range - it changes how much edge load it can take. Keep the panel within 8-12 mm and the clamp will seat correctly with the supplied gaskets.

Yes. A heavy door needs a floor spring or pivot sized for its weight; the bottom patch clamps the glass and transfers load, but it is not a hinge. Match the floor unit to the door weight, use our 697 top patch at the top edge, and we can advise on the combination if you send door dimensions.

Yes - the 700 is offered in both 304 and 316 stainless. Choose 316 for coastal, pool, or chemical-heavy environments. Finishes available are brushed nickel, chrome, matte black, and custom colors; the finish sits on the stainless body so it stays consistent with the rest of the door hardware.

1 pc sample (sample fee may apply), 50 pcs standard, 500 pcs for OEM or custom logo. Lead time is 15-25 days. If you are supplying several doors, group the order to reach the 50 pc bracket and get the better unit price.