Frameless Glass Door Patch Fitting Top and Bottom Patch Hardware Stainless Steel

Yes - the 702 is a top-and-bottom hardware set for one frameless door, both pieces in 304 stainless and finished to match. It fits 8-12 mm tempered glass. The two pieces come from the same batch, so the surface tone matches and you avoid the color drift you can get buying fittings separately.

8-12 mm tempered glass. Both clamps are gasket-lined and sized for that range. If your project uses 10-16 mm panels, that is outside this set - see the glass-to-glass connectors (705) instead, or ask us for a recommendation.

They use the same screw pattern, so one template covers both. We supply the drilling template with the order. Give it to your glass fabricator before cutting so the holes line up - on-site drilling of tempered glass is not possible once it is hardened.

The set is available in brushed nickel, chrome, matte black, and custom colors - the same options as the 697 and 698 series. If you are mixing this set with connectors from the same range, the tones match because they come from the same finishing line.

Yes - each order includes a drilling template and a short installation sheet with screw torque. Installation is a standard frameless door job: clamp the bottom edge, seat the top patch, align the panel plumb, then torque the screws. Most glazing crews handle it in under an hour per door.

1 pc sample with possible sample fee, 50 sets standard, 500 sets for OEM or custom logo work. Lead time is 15-25 days. Let us know the finish split when you order multiple doors so we can batch the finishing and keep the color consistent.