Stainless Steel Horizontal Glass Clamp Rail Glass to Glass for Outdoor Glass Railing

It connects two glass panels directly to each other — one jaw grips the edge of one panel, the other jaw grips the adjacent panel, so the clamp acts as the joint between them. This is used where panels are joined in line or at an angle without a post in between, keeping the railing open and frameless-looking.

Yes — it is a horizontal glass clamp rail: the clamps run along the top or mid-height of the railing and tie the glass panels together, stiffening the balustrade against lateral loads. It complements the posts or spigots that carry the panels vertically. For outdoor balconies this horizontal bracing is often required by the design to keep panels from shifting.

The clamp is designed for the standard tempered glass thicknesses used in railing systems — confirm your glass thickness when ordering and we'll match the jaws. For angled runs such as staircases and corners, the clamp can be set to the required angle; the adjustable versions handle the common range of stair slopes. Send us the layout and angles and we'll confirm the right model.

Yes — it is built for outdoor glass railing. Available in 304 and 316 stainless. For coastal sites, choose 316 and a finish like matte black or brushed nickel; the gaskets between clamp and glass also shield the panel edge. Standard finishes: brushed nickel, chrome, Gun Gray, matte black and custom colors.

No — the jaws are lined with rubber gaskets so the steel never touches the glass. Tighten to a firm grip, not maximum torque, because over-tightening puts stress on the glass edge. The gaskets also absorb minor thermal movement. If gaskets wear after years in service, we supply replacements.

1 pc samples (sample fee may apply), 50 pcs standard, 500 pcs OEM/custom logo. Lead time 15–25 days. If you need a matched set with posts, spigots and handrail tubes, we can quote the whole railing package from one factory.