Adjustable Glass Clamp Shower Glass Holder for Glass Door Partition Premium Design

The clamp gives the installer some adjustment in how the jaw sits against the glass and panel, which helps correct small out-of-plumb conditions on site — a real time-saver on frameless doors where everything must end up dead level. It is not an infinite-position hinge; it is a wall/partition clamp with a practical range of movement. Tell us your application and we will confirm the adjustment range you need.

This model is available in brass and stainless steel 304. Brass gives the heavier, richer feel for residential hardware, while 304 stainless covers wet-environment durability. Both versions take the standard finish range of brushed nickel, chrome, brushed bronze, gun gray, or custom colors, so the adjustable clamp can match your other fittings.

No — the adjustment is in the mounting, and once the clamp is set and the screws are tightened, the jaws lock onto the glass through rubber gaskets with full clamping force. The design keeps the grip independent of the adjustment, so you do not trade holding strength for alignment flexibility.

It fits 8–12mm tempered glass, the standard range across our clamp range. The gaskets adapt to the actual panel thickness and protect the glass edge from metal contact. If you are installing into a renovation where existing glass is already fitted, tell us the exact thickness and we will confirm the jaw opening.

It is built for partition and fixed-panel mounting where alignment matters. On a swinging door the hinged edge needs a proper pivot or door hinge — a clamp on the swing side will not allow movement. For a fixed panel next to a door, this adjustable clamp is a good match because it helps you set the panel perfectly vertical.