135 Degree Glass to Glass Hinge Bathroom Glass Door Hinge Frameless Design

135 degrees is the middle opening angle - wider than a standard 90 degree swing but not a full fold-back. It is common for corner shower doors and bathroom glass doors where the door opens into the room and you want a comfortable entry without the door swinging all the way back against a wall or another panel. The fixed stop also helps you see how the door will sit.

It is built for frameless shower and bathroom glass doors in 8-12mm tempered glass. Rather than quoting a single weight number, the practical rule is: a standard single shower door panel sits comfortably on two of these hinges; taller or wider panels should use three, or step up to our heavy-duty line. Give us your panel width, height and glass thickness and we will confirm the hinge count.

The brass body is coated before shipping, so it does not tarnish as long as the coating is intact. Warm, saturated finishes like brushed bronze and gun gray show water spots less than polished chrome. Use a soft cloth and mild soap, never acid or abrasive cleaners. For a coastal bathroom, pick the stainless version of the same hinge instead.

Yes - it is a glass-to-glass hinge, so one leaf bolts to the fixed glass and the other to the door glass. Both panels must be drilled before tempering using our hole pattern; we send the drilling drawing with the order. Rubber gaskets sit between the clamp plates and the glass to avoid metal-to-glass contact, and the bolts are tightened evenly to distribute the load.

This model is specified in solid brass for customers who want the machined detail and warm tone of brass hardware. The same 135 degree hinge body is also produced in SUS304 and SUS316 stainless. If your spec calls for stainless, just say so in your inquiry - same geometry, different material, and stainless is the easier option for heavy moisture.

Yes, samples start at 1 piece and a sample fee may apply, refundable against a production order. Standard production minimum is 50 pieces; custom finishes and logo/OEM orders run from 500 pieces. Lead time is 15-25 days. When requesting the gun gray sample, confirm your glass thickness so we set up the drill pattern correctly.