Top and Bottom Pivot Support Bar for Shower Glass Door Stainless Steel Pivot System

This listing covers the full top-and-bottom pivot support bar system for a frameless glass door — the support bar that carries the door plus the pivot hinge function at both ends, supplied as a matched set. The single pivot bar version is the same concept where one bar per door edge is specified. Both are 304 stainless and designed for 8–12mm frameless doors; choose the set if you want top and bottom supplied together.

The bottom support bar anchors to the floor and carries the door through the pivot point, while the top bar anchors to the ceiling or header and guides the swing. Together they hold the glass panel upright without a visible frame along the door edge, which is what gives the frameless look. Floor fixing is through the base plate of the bottom bar.

Yes, the pivot set is designed for the 8–12mm tempered glass range, so 10mm doors are squarely within spec. The glass is held at the pivot points through the gasketed fittings and the door swings on the top and bottom pivots. If your door is at the heavy end, send the panel weight and we will confirm before production.

Brushed nickel, chrome, brushed bronze, gun gray, and custom colors are available. Since the bars are highly visible on the door, we recommend ordering the pivot set together with your door clamps and handle so the whole suite is plated in one batch and the tones match across every piece.

A sample set is available at a sample fee for testing on your door. Standard orders start at 50 pcs and OEM/custom-logo orders at 500 pcs, with a 15–25 day lead time. Include the door glass thickness and swing direction in your order so the top and bottom pivot bars are configured correctly for your opening.