Folding Shower Door Hardware Stainless Steel Frameless Shower Glass Door Hardware Kit

A folding door is hinged in sections, so the panels fold back against a fixed jamb instead of riding a track. This set supplies the pivot hinges, knuckle hinges between panels, and the top and bottom pivot units, so the folded door stacks into a narrow space. It suits wide openings where floor space in front is limited.

It's designed for typical frameless folding shower doors, usually two or three panels hinged together. The hinge set and pivot capacity suit standard 8-10mm tempered glass. If you're planning four or more panels or an unusually heavy stack, send the panel count and weight so we can check the pivot load before you order.

8-10mm tempered glass, the standard range for frameless shower enclosures. The pivots and knuckle clamps hold the panel edges with rubber cushions. The glass is drilled for the pivot pins, so your glass shop needs our drilling template before tempering. Send us your glass sizes early so the template arrives in time.

The pivots are set up so the folded stack lands against the return wall and the entry position holds open. For a positive stop you rely on level installation and the wall position. If you need a specific open or closed stop, tell us the swing direction and wall layout and we'll confirm the pivot version to fit.

Yes. All visible hardware, pivots, hinges, clamps, and screws, is SUS304 stainless steel, so a folding door sitting in water spray for years won't show rust staining. Finishes available: Brushed Bronze, brushed nickel, chrome, gun gray, and custom colors. For coastal projects ask about the 316 option.

The set includes the knuckle hinges, top and bottom pivot units, glass clamps, rubber cushions, and mounting screws. It does not include the glass. Two-panel and three-panel configurations need different hinge quantities, so specify the panel count when you order and we'll pack the right number.