AISI 304 V-Type Two Arm Spider Fitting 200mm

Two Arm Spider Fitting for Architectural Glass

Toto two arm spider fitting provides two glass fixing positions within a point-supported architectural glazing system. AOYU manufactures this 200mm fitting from AISI 304 stainless steel for use with compatible glass fixing components and metal supporting structures.

Unlike single-arm spider fittings, this model features two arms arranged at approximately 90 degrees. Each arm ends in a circular connection point, while the central section provides a separate mounting position.

As a result, the fitting offers a practical connection arrangement for glass structures that require two fixing points around a corner or angled support position.

Architectural applications include glass facades, glass canopies, awnings, and other point-supported glazing systems.

AISI 304 Stainless Steel Construction

AOYU uses AISI 304 stainless steel to manufacture this two-arm glass spider fitting.

Stainless steel provides mechanical strength and corrosion resistance for architectural hardware applications. In addition, its metallic appearance complements modern glass and steel structures.

The product features two straight connecting arms, circular fixing ends, and a central mounting section.

Furthermore, the visible surfaces have a smooth metallic appearance, making the fitting suitable for architectural projects where hardware remains exposed.

Customers should confirm the required surface finish and installation environment before ordering.

90 Degree Two Arm Spider Fitting Design

Right-Angle Arm Configuration

Toto 90 degree spider fitting features two connecting arms extending from a shared central section.

This arrangement creates two glass fixing positions within one fitting.

Compared with a straight single-arm connector, the right-angle design allows designers to arrange two fixing connections around a central mounting position.

Therefore, the fitting can support project layouts that require an angled connection geometry.

However, the actual installation angle, fixing positions, and supporting frame dimensions must match the approved project drawings.

Circular Glass Connection Ends

Each arm terminates in a circular opening designed to accommodate a compatible glass fixing connection.

The circular ends provide defined attachment positions for the selected fixing hardware.

Meanwhile, the central section includes a separate opening for connection to the supporting structure.

Before installation, contractors should verify the hole dimensions, fixing components, and mounting arrangement.

In particular, buyers should confirm that the selected glass holders match the spider fitting and the intended glass configuration.

200mm Spider Fitting Size and Project Selection

This product belongs to the 200mm spider fitting series.

The size designation helps buyers identify the required model when comparing different spider arm configurations.

Nevertheless, the 200mm designation should not replace the detailed technical drawing.

For accurate installation planning, customers should confirm the arm dimensions, hole positions, and mounting clearances before ordering.

In addition, the selected fitting must match the supporting frame and the required glass connection locations.

AOYU recommends reviewing the complete project drawing before confirming bulk production or procurement quantities.

Glass Fixing Components and Compatibility

The two arm spider fitting forms part of a complete point-supported glass connection system.

However, the spider fitting alone does not secure a glass panel. The installation also requires compatible glass fixing components and suitable structural connections.

Depending on the project, the complete arrangement may include:

• Glass fixing holders or point-fixing connectors
• Appropriate glass panel hole preparation
• Supporting metal framework
• Structural mounting hardware
• Other project-specific connection components

Therefore, buyers should provide the glass thickness, fixing details, and technical drawings when requesting product compatibility information.

Furthermore, customers should confirm which accessories are included in the quotation and which components require separate purchase.

Applications of Two Arm Glass Spider Fittings

Point-Supported Glass Facades

Architectural glass facades use spider fittings to connect glass panels to structural support systems.

The two-arm configuration provides two fixing positions for suitable facade connection layouts.

In addition, the right-angle arrangement offers an alternative to straight-arm or four-arm spider fitting designs.

Architectural Glass Canopies

Glass canopies may also require point-supported connections between glass panels and metal structures.

For these projects, the two-arm fitting can form part of the overall support arrangement when the design calls for its connection geometry.

However, the project engineer must verify the structural loads, glass configuration, and complete fixing system.

Glass Awnings and Other Glazing Structures

The fitting may also serve compatible architectural awnings and other point-supported glass installations.

Its application depends on the glass layout, supporting structure, and specified connection requirements.

Therefore, designers should evaluate the complete glazing system rather than selecting hardware based on appearance alone.

Technical Specifications

Špecifikácia	Details
Názov produktu	Two Arm Spider Fitting
Product Type	90 Degree Glass Spider Fitting
Materiál	AISI 304 Stainless Steel
Size Designation	200 mm
Arm Configuration	Two Arms at Approximately 90°
Glass Fixing Positions	2
Central Mounting Position	1
Connection Ends	Circular Openings
Aplikácie	Glass Facades, Canopies, Awnings and Architectural Glazing
Manufacturer	AOYU Hardware

Technical Note: The 200mm size designation and material are based on the supplied product information. Exact mounting dimensions, compatible glass thickness, fixing accessories, and allowable loads require confirmation against the manufacturer's technical specifications.

Installation Considerations

Before installing the two arm spider fitting, contractors should review the project drawings and verify the required connection geometry.

First, check the central mounting position and confirm its compatibility with the supporting metal structure.

Next, verify the two glass fixing positions and the corresponding glass hole preparation.

In addition, installers should select suitable glass fixing components for the specified glass configuration.

The supporting framework, mounting hardware, and glass panels must also meet the project's structural requirements.

Finally, qualified engineers should assess the complete installation and verify its load-bearing performance.

AOYU Manufacturer and B2B Supply

AOYU manufactures architectural glass hardware for international wholesalers, distributors, glass processors, and construction contractors.

Our spider fitting range includes different arm arrangements for point-supported glazing applications.

For example, customers can select single-arm, two-arm, and other suitable spider fitting configurations according to their project requirements.

In addition, AOYU supports OEM and project-specific hardware inquiries.

To help our team review your requirements, please provide the product model, required quantities, glass specifications, and relevant technical drawings.

We can then discuss the appropriate fitting configuration, available finishes, and production requirements.

Contact AOYU for two arm spider fitting specifications, OEM customization, and wholesale quotations.