Aluminum Glass Door Hinge for Single-Action Swing Doors

Ten Aluminum Glass Door Hinge for Single-Action Swing Doors is a round-design wall-to-glass hinge developed for frameless tempered glass doors that open in one direction.

Unlike spring-loaded or hydraulic glass door hinges, this model contains no spring mechanism, no damping system and no self-closing function. It provides a straightforward mechanical pivot connection for applications where the door is opened and closed manually.

Made from aluminum alloy, the hinge is suitable for Szkło hartowane o grubości 8–10 mm. A pair of two hinges can support a glass door weighing up to approximately 45kg, subject to door dimensions, installation quality and mounting conditions.

Standard finishes include Silver and Matte Black, with custom colors available.

Dane techniczne produktu

Specyfikacja	Details
Nazwa produktu	Aluminum Glass Door Hinge for Single-Action Swing Doors
Product Type	Single-Action Glass Door Hinge
Design	Round Design
Materiał	Stop aluminium
Installation Type	Wall-to-Glass
Door Movement	Single Action / One-Way Swing
Self-Closing	No
Spring Mechanism	No
Damping Function	No
Glass Type	Tempered Glass
Grubość szkła	8–10mm
Load Capacity	Up to 45kg per 2 Hinges*
Standard Finish	Silver / Matte Black
Kolory niestandardowe	Dostępne
Customization	Accepted
Typical Applications	Sauna Rooms / Kitchens / Dining Rooms / Bedrooms / Studies / Offices

*Actual capacity should be confirmed according to door height, width, glass weight and installation conditions.

Single-Action Swing Operation

To aluminum glass door hinge is designed for a single-action swing door.

The glass door opens in one designed direction rather than swinging freely in both directions.

This makes the hinge suitable for interior glass doors where controlled one-way movement is preferred, including:

• Sauna room glass doors
• Kitchen glass doors
• Dining room doors
• Study room doors
• Bedroom glass doors
• Szklane drzwi biurowe
• Interior glass partitions

Depending on surface treatment and environmental requirements, the hinge may also be considered for suitable sheltered exterior applications. For exposed outdoor environments, the finish and corrosion-resistance requirements should be confirmed before ordering.

Wall-to-Glass Installation

The hinge uses a wall-to-glass mounting configuration.

One side is secured to the wall or suitable structural surface, while the other side clamps the tempered glass door.

This configuration eliminates the need for a separate glass sidelite and makes the hinge particularly suitable for door openings where the moving glass panel is positioned directly beside a wall.

No Spring and No Self-Closing Mechanism

A major distinction of this model is its simple mechanical construction.

The hinge does not contain:

Spring assistance
Hydraulic damping
Soft-close mechanism
Automatic self-closing mechanism

The door is therefore operated manually.

This can be an advantage for projects where customers want a simple glass hinge without the additional resistance, maintenance or complexity associated with spring-loaded and hydraulic hinges.

Round Aluminum Design

The hinge features a rounded body design that gives the hardware a softer appearance than conventional rectangular glass hinges.

The aluminum alloy construction also helps keep the fitting relatively lightweight while maintaining the structural function required for standard frameless glass doors.

The round profile works particularly well with minimal interior designs, sauna rooms and modern glass partitions.

Suitable for 8–10mm Tempered Glass

The hinge is designed for:

8mm tempered glass

oraz

10mm tempered glass

The correct gasket and clamping configuration should be selected according to the actual glass thickness.

Before installation, the glass dimensions, door weight and fixing surface should also be checked.

Up to 45kg with Two Hinges

A standard installation using two hinges can support a glass door weighing up to approximately:

45kg

The actual allowable weight depends on several factors, including:

• Wysokość drzwi
• Szerokość drzwi
• Grubość szkła
• Hinge spacing
• Wall structure
• Installation accuracy
• Frequency of use

For oversized doors, project dimensions should be confirmed before hardware selection.

Suitable for Sauna Room Glass Doors

This hinge can be used for suitable sauna room glass doors.

The aluminum construction is lightweight and corrosion-resistant under many normal interior conditions, while the simple non-spring mechanism reduces mechanical complexity.

However, the hinge itself should not be described as a thermal-insulation component. In a sauna installation, heat retention depends primarily on the glass specification, seals, door design and overall enclosure structure.

Surface Finish Options

Standard finishes include:

Silver
Provides a clean aluminum appearance suitable for modern interiors.

Matowa czerń
Suitable for contemporary glass door and partition designs.

Kolory niestandardowe
Other colors and surface treatments can be produced according to project requirements.

Custom Manufacturing

Customization is available for suitable B2B and project orders.

Options may include:

• Color
• Obróbka powierzchni
• Selected dimensions
• Opakowanie
• Budowanie marki
• OEM requirements

Customers can provide drawings, samples or project specifications for confirmation.