AISI 304 Adjustable Glass Canopy Point Fixing for 10–22mm Glass

Adjustable Glass Canopy Point Fixing for Stainless Steel Tie Rod Systems

The adjustable glass canopy point fixing from AOYU is a stainless steel glass to rod fitting designed for architectural glass canopies. It connects glass panels to tie rod support assemblies and provides an adjustable fixing solution for glass awnings.

Manufactured from AISI 304 stainless steel, this fitting features an adjustable connection structure, a polished surface, and a circular glass clamping head. It accommodates glass thicknesses from 10mm to 22mm, making it suitable for different engineered canopy configurations.

The compact point-fixing design helps create a clean architectural appearance while providing a connection between the glass panel and its supporting hardware.

Adjustable Glass Canopy Point Fixing Design

Adjustable Connection Structure

The fitting incorporates a threaded connection and an adjustable assembly that allows installers to align the fixing with the required canopy configuration.

This arrangement helps accommodate installation requirements in tie rod supported glazing systems.

The adjustable structure is particularly useful where the glass panel and supporting connection need careful positioning during installation.

Circular Glass Clamping Head

The glass fixing head features a circular stainless steel cover with an outer diameter of 50mm.

Its clamping assembly secures the glass around a prepared fixing hole, while protective inserts help separate the metal components from the glass surfaces.

The polished circular head also provides a neat appearance on exposed architectural glazing.

Stainless Steel Threaded Connection

The fitting uses an M14 threaded connection, as shown in the technical drawing.

The threaded section works with the corresponding support connection specified for the project. Therefore, customers should confirm the matching hardware and installation dimensions before ordering.

AISI 304 Stainless Steel Material

AOYU manufactures this adjustable glass holder from AISI 304 stainless steel with a polished finish.

AISI 304 offers corrosion resistance for many architectural environments. In addition, its polished surface complements stainless steel tie rods and other exposed glass canopy fittings.

The material is suitable for many general architectural applications. However, projects in coastal or highly corrosive environments require a separate material suitability assessment.

Technical Specifications

Specyfikacja	Details
Nazwa produktu	Adjustable Glass Canopy Point Fixing
Product Reference	1816-10-22mm
Fitting Type	Adjustable Point Fixing / Glass Holder
Main Application	Tie Rod Supported Glass Canopies
Materiał	AISI 304 Stainless Steel
Wykończenie powierzchni	Polished Stainless Steel
Specified Glass Thickness	10–22mm
Glass Fixing Head Diameter	Ø50mm
Thread Connection	M14
Structure	Regulowany
Specified Maximum Fx	4,500 N
Specified Maximum Fy	2,000 N
Manufacturer	AOYU Hardware

Technical Note: The Fx and Fy values are the specified maximum loads for this fitting, not the load capacity of a complete glass canopy. Final suitability depends on the glass specification, tie rod system, supporting structure, connection geometry, and project-specific engineering calculations.

Glass Thickness and Installation Requirements

The fitting is specified for glass thicknesses between 10mm and 22mm in the supplied product information.

Its adjustable clamping arrangement allows installers to accommodate the specified glass thickness range when using the appropriate components.

Before installation, check the glass hole dimensions, clamping arrangement, and matching support connection against the approved technical drawing.

Protective gaskets or spacers should be correctly positioned between the glass and metal components.

Additionally, the installation must follow the structural design and fastening requirements of the complete canopy system.

Applications of Adjustable Glass Canopy Fittings

Glass Entrance Canopies

This fitting can be used in engineered glass canopy systems above commercial or residential entrances.

It provides a connection between the canopy glass and the specified tie rod support arrangement.

Stainless Steel Tie Rod Canopy Systems

Installers use this adjustable point fixing to connect glass canopies to stainless steel tension rod systems.

It forms part of the connection assembly that transfers loads from the glass panel to the supporting structure.

Architectural Glass Awnings

The fitting can also be specified for architectural glass awnings where a point-supported connection is required.

Potential projects include building entrances, shopfronts, and other glass canopy installations designed with suitable structural support.

Adjustable Point Fixing vs Standard Glass Spider Fittings

An adjustable glass canopy point fixing serves a different function from a conventional multi-arm spider fitting.

A spider fitting typically provides several glass fixing positions around a central support. In contrast, this point fixing connects at an individual glass fixing location and can form part of a tie rod supported canopy system.

Its circular clamping head and threaded connection make it suitable for the intended glass-to-support connection.

For this reason, the fitting should be selected according to the actual canopy system rather than treated as a universal replacement for spider fittings.

AOYU Glass Canopy Hardware Manufacturer

AOYU specifies this fitting for glass thicknesses between 10mm and 22mm.

Installers can use this fitting in engineered glass canopy systems.

Architects can also specify this fitting for glass awnings.

Installers should position protective gaskets or spacers between the glass and metal components.

Contact AOYU Hardware to request a quotation, technical drawing, or assistance selecting glass canopy fittings for your next project.