Two Arm Glass Fin Spider Fitting 275mm | AISI 304 | AOYU

Two Arm Glass Fin Spider Fitting for Point-Supported Glazing

Tento two arm glass fin spider fitting from AOYU connects architectural glass panels to a structural glass fin in point-supported glazing systems. Its straight, I-type configuration provides two opposing glass fixing positions, while the central mounting assembly creates a connection to the supporting glass fin.

Manufactured from AISI 304 stainless steel with a polished (PSS) finish, this fitting combines a streamlined appearance with a practical glass-to-glass support arrangement.

Unlike conventional two-arm spider fittings mounted directly to a metal support, this model features a central double-plate assembly designed for glass fin installation.

I-Type Two Arm Spider Fitting Design

Straight Two-Position Connection

The fitting features two arms extending in opposite directions from its central mounting structure.

Each arm ends in a circular connection opening for a compatible glass holder. Therefore, the fitting can support a two-position glazing arrangement where the panel connection points align with the structural glass fin.

The straight configuration is particularly relevant to glazing layouts that require two connection positions rather than the three- or four-position arrangements of other spider fitting models.

Central Glass Fin Mounting Assembly

The central section uses two parallel stainless steel mounting plates with fastening components.

This assembly connects the spider fitting to a structural glass fin, creating a load-transfer connection between the facade glass and its supporting structure.

The final glass preparation, fastening arrangement, and contact protection must follow the approved project drawings.

AISI 304 Stainless Steel and Polished Finish

AOYU manufactures this glass fin spider fitting from AISI 304 stainless steel.

The material provides corrosion resistance for many architectural applications. Furthermore, its polished (PSS) surface offers a reflective appearance that complements exposed stainless steel hardware in glass facade systems.

Because spider fittings often remain visible through the glazing, the finish is an important consideration for architectural projects.

For coastal or highly corrosive environments, customers should verify whether AISI 304 meets the project's material requirements.

Technical Specifications

Specifikace	Details
Název výrobku	Two Arm Glass Fin Spider Fitting
Product File Reference	1807-200MM
Configuration	I-Type / Straight Two Arm
Glass Fixing Positions	2
Center-to-Center Distance	275mm
Materiál	AISI 304 Stainless Steel
Povrchová úprava	Polished (PSS)
Mounting Type	Glass Fin Mount
Connection Application	Glass Panels to Structural Glass Fin
Compatible Glass Holder	Model 1816
Glass Holder Included	No, Sold Separately
Specified Maximum Fx per Arm	2,500 N
Specified Maximum Fy per Arm	1,500 N
Manufacturer	AOYU Hardware

Load Information: The stated Fx and Fy values apply to each individual arm. They do not represent the capacity of the complete glazing system. A qualified structural engineer must verify the glass panels, structural glass fin, fasteners, and overall connection design.

Compatible 1816 Glass Holders

This I-type spider fitting is compatible with model 1816 glass holders.

The glass holders connect the spider arms to the corresponding facade glass panels. However, these accessories are sold separately and must be selected according to the project's glass specification.

Before ordering, confirm the required glass holders, hole preparation, glass thickness, and connection details.

This helps ensure that the selected components work together as part of the approved glazing system.

Applications of Two Arm Glass Fin Spider Fittings

Glass Fin Supported Facades

This fitting is designed for point-supported facades that use structural glass fins as part of the supporting system.

Its central mounting assembly connects the two-arm spider to the glass fin, while the outer fixing positions connect to the facade glazing.

Architectural Glass Curtain Walls

The fitting can also form part of engineered glass curtain wall systems where the design requires two aligned glass fixing positions.

In these applications, the structural glass fin provides support behind the facade panels, helping maintain a visually open glazing arrangement.

Commercial Glazing Projects

Suitable project applications may include:

• Point-supported commercial glass facades
• Structural glass fin glazing systems
• Glass curtain wall connections
• Architectural entrance glazing
• Atrium glazing structures

All applications require project-specific structural design and verification.

Installation and Structural Considerations

Before installation, confirm the fitting dimensions and glass fin connection details against the approved technical drawing.

The central mounting assembly must match the structural glass fin and its prepared connection points.

In addition, installers should verify the position of both spider arms and the compatibility of the selected 1816 glass holders.

Appropriate protective interfaces must prevent direct metal-to-glass contact where required by the glazing design.

Finally, the completed assembly must meet the applicable structural and safety requirements for the project.

AOYU Two Arm Glass Fin Spider Fitting Manufacturer

AOYU Hardware manufactures stainless steel spider fittings and architectural glass connection hardware for glass processors, facade contractors, wholesalers, and glazing system distributors.

Our spider fitting range includes single-arm, two-arm, three-arm, and four-arm configurations for different mounting and glass connection requirements.

We also support OEM and ODM inquiries for suitable product dimensions, finishes, and hardware configurations.

Contact AOYU Hardware to request a quotation, technical drawing, or compatible glass fixing accessories for your architectural glazing project.