Glass Door Handle Supplier | Frameless Shower Door Pull Handle Manufacturer

Brass gives a heavier feel in the hand and a warmer tone under finishes like brushed bronze and gun gray, which is why it is used in high-end bathrooms. Stainless steel is lighter, harder and does not tarnish at the mounting points. On this handle, both can be finished to the same color, so the choice comes down to weight, budget and corrosion exposure. Stainless is the safer pick for wet rooms.

Yes, it is mounted to frameless glass in the 8-12mm range through drilled holes, using the handle studs and fasteners with soft washers. The glass should be tempered and drilled before installation. If your project uses undrilled glass, drilling is normally done at the glass supplier or on site with the correct diamond drill. We can provide the hole spacing drawing for the glass shop.

The listed finishes are brushed bronze, brushed nickel, chrome and gun gray, with custom colors available on request. For a custom color, send a chip or reference and we will match it on a sample. Keep in mind that colored finishes are matched and sealed in batches, so for projects where multiple handles must match exactly, order them in one production run.

Two ways. The body is stainless steel 304 or 316 (brass is plated and finished for the wet environment), and the surface finish is sealed over the metal. The most common failure point is not the handle body but water trapped between the handle and the glass, so we use fitted washers that close off the joint. Choose 316 for seawater or chlorine-heavy environments.

Yes, a single sample is possible and a sample fee may apply; it is returned with your first standard order. The sample is produced from the same tooling as bulk production, so the finish and dimensions represent the mass order. Lead time is 15-25 days for production, and samples ship faster once the finish is confirmed.