Square Stainless Steel Fixed Glass Patch Fitting

Acest Square Stainless Steel Fixed Glass Patch Fitting is a compact fitting designed to hold and secure fixed tempered glass panels in frameless glass door and partition systems.

With a 55 × 55mm square profile, the fitting combines an aluminum alloy body with a stainless steel faceplate, providing a practical balance of structural support, appearance and cost.

It is suitable for 10–12mm tempered glass and is commonly used for securing fixed glass panels in bathrooms, kitchens, offices, commercial interiors and frameless glass partition systems.

Standard finishes include Mirror, Brushed and Matte Black.

Specificații produs

Compact 55 × 55mm Square Design

One of the main characteristics of this fitting is its compact 55 × 55mm square body.

The small footprint helps secure the glass without adding an oversized visible fitting, making it suitable for modern frameless glass installations where clean lines and minimal hardware are preferred.

Compared with larger overpanel or pivot patch fittings, this product is primarily designed as a compact fixed-glass holding fitting.

Aluminum Alloy Body with Stainless Steel Faceplate

The fitting uses a combination of:

Aluminum Alloy Body
Provides the internal structural body while helping keep the fitting relatively lightweight.

Stainless Steel Faceplate
Creates the visible exterior finish and allows the fitting to match other stainless steel architectural hardware.

This material combination is commonly suitable for interior frameless glass systems where appearance, durability and installation practicality are all important.

Designed for Fixed Glass Panels

The main purpose of this fixed glass patch fitting is to hold and secure a stationary glass panel.

Typical uses include:

• Fixed glass beside frameless glass doors
• Interior glass partitions
• Bathroom glass panels
• Kitchen glass partitions
• Office glass dividers
• Instalări de sticlă pentru uz comercial
• Fixed architectural glass panels

Unlike pivot fittings, this model is not primarily intended to create a rotating door pivot point.

Its main role is glass positioning and fixed-panel support.

Suitable for 10–12mm Tempered Glass

The fitting is designed for:

10mm tempered glass

și

12mm tempered glass

Before installation, the actual glass thickness and fitting dimensions should be confirmed to ensure the correct fit.

For projects requiring glass drilling or cut-outs, hardware dimensions should be checked before the glass is processed.

Suitable for Bathrooms and Kitchens

The compact fixed-glass design makes this fitting suitable for many interior architectural applications.

Bathroom Applications

It can be used to secure fixed tempered glass panels around shower areas or bathroom partitions.

Kitchen Applications

The fitting can also be used in suitable kitchen glass partitions or fixed glass divider systems.

For architectural projects, the fitting can additionally be used in offices, hotels, apartments and commercial interiors.

Frameless Glass Door and Partition Applications

Although the fitting itself primarily secures fixed glass, it can form part of a complete frameless glass door system.

For example, a fixed glass panel positioned beside a door opening can be secured using this fitting while separate hinge, pivot or patch hardware controls the moving door panel.

This separation of functions helps create a cleaner and more organized frameless glass hardware system.

Surface Finish Options

Three standard finishes are available:

Mirror Polished
Provides a bright reflective appearance suitable for polished architectural hardware.

Brushed
Creates a satin stainless steel appearance commonly used in modern interiors.

Negru mat
Suitable for contemporary black hardware and frameless glass designs.

The finish can be selected to match handles, hinges, patch fittings and other visible hardware used in the same glass installation.