AISI 304 Double-Arm Glass Canopy Wall Bracket

Double-Arm Glass Canopy Wall Bracket Overview

Acest glass canopy wall bracket provides a wall-mounted support connection for architectural glass canopy and awning systems. Its double-arm design creates two connection positions for glass fixing components, making it suitable for projects that require a dual-point support arrangement.

AOYU manufactures the 400-200MM bracket from AISI 304 stainless steel. The product features a V-shaped double-arm structure, a rectangular wall mounting flange, and two circular connection ends.

In addition, the mounting flange includes three fixing holes. This arrangement allows installers to secure the bracket to a suitable supporting wall according to the project design.

Double Arm Canopy Bracket Construction in AISI 304

The bracket uses AISI 304 stainless steel for strength and corrosion resistance in architectural hardware applications.

Unlike a single-arm canopy holder, this model features two angled support arms extending from a common wall mounting base. Each arm ends in a circular connection point for the corresponding glass fixing component.

Furthermore, the stainless steel construction complements modern glass canopy designs and other architectural metal fittings.

The product images show a polished metallic appearance. Buyers should confirm the required surface finish when placing an order.

Three-Hole Wall Mounting Flange

Wall-Side Fixing Arrangement

The glass canopy wall bracket features a rectangular mounting flange with three installation holes.

Before installation, installers should verify the wall material, anchor specifications, fixing positions, and structural requirements.

Moreover, the supporting wall and selected anchors must accommodate the loads transferred through the bracket.

Double Glass Connection Points

The two support arms provide separate connection positions for glass fixing holders.

This design allows the bracket to form part of a glass canopy system with two glass connection points.

Glass fixing holders are sold separately. Customers should select the appropriate holders according to the glass thickness and connection requirements.

Therefore, buyers should confirm the complete connection arrangement before ordering.

Glass Thickness and Holder Compatibility

The 400-200MM bracket is intended for architectural glass canopy systems using tempered laminated glass.

The technical specifications identify the following laminated glass options:

• 13.52 mm — laminated glass configuration 6.2.6
• 17.52 mm — laminated glass configuration 8.2.8
• 21.52 mm — laminated glass configuration 10.2.10

The separately selected glass fixing holder offers adjustment for glass thicknesses from 10 to 22 mm, according to the supplied technical information.

However, customers must verify the selected holder's actual adjustment range and compatibility with the intended glass configuration.

In addition, canopy projection, glass dimensions, support positions, and structural loads must be considered during project design.

Working Load Specifications

The manufacturer-provided technical specifications list the following maximum working loads per fixing point:

• Fx direction: 4,500 N
• Fy direction: 3,500 N

These values refer to the specified loading directions at an individual fixing point.

However, they do not establish the allowable load of the complete canopy system. The wall structure, anchors, glass panels, connection components, and overall support arrangement also affect installation performance.

Therefore, a qualified project designer or engineer should verify the complete assembly before installation.

Glass Canopy Wall Bracket Applications

The double-arm bracket supports architectural glass canopy and awning installations.

Typical applications include:

• Glass entrance canopies for commercial buildings
• Glass awnings above shop entrances
• Glass canopies above basement entrances
• Covered smoking areas
• Other architectural glass canopy projects

Its double-arm construction provides two connection positions within the support arrangement.

As a result, the bracket offers an alternative configuration for projects that require two glass fixing points connected to a common wall mounting base.

Technical Specifications

Specificație	Details
Denumire produs	Double-Arm Glass Canopy Wall Bracket
Model	400-200MM
Material	AISI 304 Stainless Steel
Structure	V-Shaped Double Arm
Mounting Flange	Three Installation Holes
Glass Connection	Two Connection Positions
Glass Type	Tempered Laminated Glass
Listed Glass Thicknesses	13.52 / 17.52 / 21.52 mm
Separate Glass Holder Adjustment	10–22 mm
Maximum Working Load Fx	4,500 N per fixing point
Maximum Working Load Fy	3,500 N per fixing point
Aplicație	Glass Canopies and Awnings

Important: Glass fixing holders are purchased separately. Buyers should confirm the required holder model, mounting hardware, glass configuration, and complete installation requirements before ordering.

B2B Supply and Project Requirements

AOYU supplies architectural glass hardware for wholesalers, distributors, contractors, and professional installation companies.

For glass canopy projects, customers can provide technical drawings, glass thickness, required quantities, and installation details when requesting a quotation.

In addition, buyers should specify the required glass fixing holders and connection dimensions. Our team can then review the information and help confirm the appropriate product configuration.

For OEM or project-specific requirements, please contact AOYU with the relevant drawings and technical specifications.

Contact AOYU for product information, project inquiries, and wholesale quotations.